Mon-Fri 9am-5pm EST
Linear High Bays
Flextronics High Bays
Round High Bays
Industrial Strip Lights
Flat Panels
Troffer Lighting
Wraparounds
Temporary Lights
Area Lights
Canopy/Garage Lights
Security Lights
Wall Packs
Wet Location / Vapor Tight
Turtle Safe Lighting
Hazardous Lights
LED Downlights
Rope Lights
Linear T8 | T5 Lamps
Corn Lamps
Decorator Receptacles
Duplex Receptacles
USB Receptacles
GFCIs
Floor Boxes
Screwless Wall Plates
Stainless Steel Wall Plates
Duplex Wall Plates
Decorator Wall Plates
Toggle Switch Wall Plates
Combo Wall Plates
Blank Wall Plates
Switches
Sensors
Dimmers and Timers
Locking Devices
Ballasts
Fan Controllers
Z-Wave
Electrical Tape
Cable Ties
Wire Connectors
Weatherproof Boxes and Covers
Alumiconn
This Manufacturing Lighting Project consists of 412 existing fixtures. Quantity of new fixtures is 412.There are three different fixture heights ( 14', 20', 22') in the production area. All of fixtures can be accessed via a 25' working platform scissor lift. Customer has stated that Electrical Contractor may use their boom lift for fixtures not accessible by a scissor lift. Include in price the rental for all equipment required. All hibay fixtures to be provided with hanging kits. There are 12 fixture mounted sensors to be install in the high bay bundy area. Please verify location with customer.
Customer to supply mc cable or SJ cord for the connection of new fixtures in the production area. Electrical contractor to provide 382 mc or SJ cord connectors for connection of mc cable or SJ cord. Reuse existing flex connections for the troffer fixtures in the office area.
Staging area was discussed and possible fixture assembly area to be located across the street. Customer has agreed to transfer fixtures from fixture assembly area to installation area.
