
|
4" Non IC AT New Work Low Voltage
|
BLV81NAT Non IC AT New Work Low Voltage - Small aperture low-voltage housing for accent and task lighting.
- The BLV81NAT housing is Washington State energy code approved to meet restricted airflow requirements.
- Non IC - Insulation must be kept a minimum of 3" from housing
- Airtight housing limits the exchange of air between ceiling plenum and heated/cooled areas.
HOUSING FEATURES- Internal thermal protector rated 105°C guards against misuse of insulation materials and improper lamping.
- Lamp holder on trims adjust 30° from horizontal.
- Junction box is listed for through branch circuit wiring and has several 1/2" knockouts and four Romex pry-outs include integral strain relief and require no additional clamp.
- Reinforced captive bar hangers allows housing to be positioned at any point within a 24" joist span and then locked in place with a set screw.
- Unique beak design provides quick installation.
- 4 double-headed captive nails/screws provide for ease of installation.
- Bar hangers fit onto T-Bar spine for quick alignment and can be permanently secured.
INSTALLATION FEATURES- Supplied with 3 - #30-614 Ideal Push in wire connectors for ease of installation.
- 5 1/2" height allows use in 2" x 6" joist construction.
- Housing adjusts to accommodate ceiling thickness.
LISTINGS- UL damp location
- UL feed through.

|